Axcess AxcessView User Guide Bedienungsanleitung PDF herunterladen (Seite 24)

AxcessView User’s Guide

Figure 13 Setting up alarms and relays

2: From the Action drop-down list, select the type of event that should cause an alarm

condition.

• Normal Tag Read – indicates a tag has passed through a RF field and

broadcasted it identification information to a receiver.

• Panic Tag Read – indicates an alarm code has been transmitted from a tag in

which the panic button on the tag has been depressed.

• Tamper Tag Read – indicates a tamper alarm has been transmitted from a tag in

which tampering or removal has taken place.

• Asset Movement Alarm – indicates an asset has been read without the

authorized owner within the specified time window.

• Cabinet Open – indicates a Door Open beacon has been transmitted from a tag

in which an external sensor detected the opening of the door.

3: Select ASCII for the Relay Command Type.

4: Verify that the ASCII command values are the following: 10c for C1 and 11c for C2

located at the top right.

5: Select the TTL output, if any, that you want to trigger by selecting Trigger Relay C1

and/or Trigger Relay C2 check boxes located at the top right.

6: Select the check boxes by the information you want written to the log file in the Event

Log Fields.

• TagID – tag ID number

• FC – Facility Code

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 34 35

Keine Kommentare

Axcess AxcessView User Guide Bedienungsanleitung Seite 24